Installation

Do not disassemble or modify the product.
Do not use any corrosive solvents directly or indirectly in contact with the product.
If for indoor use, it is forbidden to contact the product with water for long time.
If the product is not frequently used after installation, please turn on the product regularly (every 2-3 weeks), and keep light on for 1-2 hours in order to avoid the product deterioration.

The wire for connection must have necessary certifications, such as CE/UL/CSA/CCC/SAA/ISO, etc.
In compliance with your local electrical standards, laws and regulations.
The electrician must hold an electrical qualification certificate to carry out the electrical work, strictly forbid non-professional personal operations.
The power supply and switch should be placed in ventilated and dry location.

Please turn off the power supply before the installation.
After all wire connection finished, please double check all wirings, make sure everything is ok and then turn off the power.

Uninstall the screws on the return, separate the front part and back part.
Screw the stud on the installation hole.
Put the template on the installation surface and drill the installation holes and wiring holes.
The diameter of installation hole should be 2mm more than the stud’s, and the wiring hole should be get through.
Take the wire from the wiring hole, and fix the back part on the wall with screw.
Put silicon on the back of letter and the surface of the stud.
Put the front part on the original place, and fix the front part with screw.
Take the wire from the wiring hole, and put the sign with the installation hole.

Uninstall the screws on the return, separate the front part and back part.
Screw the stud on the installation hole.
Put the template on the installation surface and drill the installation holes and wiring holes.
The diameter of installation hole should be 2mm more than the stud’s, and the wiring hole should be get through.
Take the wire from the wiring hole, and fix the back part on the wall with screw.
Put silicon on the back of letter and the surface of the stud.
Put the front part on the original place, and fix the front part with screw.
Take the wire from the wiring hole, and put the sign with the installation hole.

ERROR EXAMPLES